|
Nylo-Seal
|
|
|
All
Thermoplastic Fitting
Nylo-Seal
fittings are ideal for instrumentation, lubricants, hydrocarbon
fuel lines, oil, coolant, low-pressure hydraulic applications
and laboratory use as well as air and hydraulic lines.
Excellent
Chemical Resistance
Nylo-Seal
tube fittings have excellent resistance to acids, alkalis, dilute
mineral acids, most organic acids, petroleum oils and greases,
photographic solutions.
Suitable for many chemical applications these
fittings are exceptionally strong and resistant to abuse. Made
from moulded nylon, they are far stronger than machined fittings of
similar composition. The sleeves are made from acetyl copolymer to
provide maximum performance.
Reduce
Installation Time
Tests
show that the Nylo-Seal fittings can be assembled in an average
time of 11.7 seconds, compared to 18.5 seconds for regular
compression fittings, and 48.2 seconds for flare type fittings.
This
offers a minimum of 36% saving in installation time, compared to
the regular compression type fittings, or ordinary fittings for
plastic tubing, and a minimum of 77% saving compared to the flare
type fittings.
Assembly
To
assemble the Nylo-Seal fitting, just push the tubing into the
fitting and tighten the nut 2 to 2 ½ full turns. There is no
need to disassemble the fitting, and no fumbling for a loose
sleeve, as the sleeve is integrated into the nut assembly. The nut
revolves around the sleeve as it is tightened, preventing torque
from being transmitted to the tubing. Design of the sleeve, nut
and body assures excellent sealing and complete reliability.
Technical
Information
Construction
-
Two
piece: body and nut/sleeve
-
Shapes:
moulded nylon
-
Connectors,
Unions, Nuts: moulded nylon
-
Sleeves:
acetyl copolymer (Celcon ®)
Tube
Sizes
Pipe
Threads
Working
Pressure
-
Nominal:
125 psi
-
Maximum:
250 psi
Operating Temperature
-
The maximum recommended
operating temperature for Nylo-Seal fittings is 200°F for continuous service, or 250°F for intermittent operation. Maximum
service temperature is limited to the factor recommended for the
tubing when this is less than the temperature specified for the
fitting.
Compatible
Tubing
-
Poly-Flo
® Tubing
-
Impolene
Tubing
-
Nylo-Seal
® Tubing
|
|
|
|
 |
